The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares T5 SP II Spada 3 Mille GT Strada 100 Fuel and Carburettors

Sort by Title

Sort by Price

Page 4 of 11

1 2 3 4 5 6 7 8 9 10 11

Inlet Reduction Sleeve

FUA29400 Fits SP II, T5

Dimensions:
34mm thread, 29.5mm internal diameter - 42mm internal diameter at large end

Aluminium inlet reduction sleeve. Threaded at smaller end

Sorry this part is no longer available Sorry, this part is no longer available.

29114400 GU29114400 29 11 44 00
2911 4400 2911.4400 29.11.44.00

this part is no longer available
Sorry this item is out of production

Inlet Manifold Rubber Late PHM 40

FUA28361 Fits 850/1000 ALL Models, 1100 Sport Carb

Dimensions:
45mm ID x 38mm length

Special Inlet rubber with HT lead guide for late Dellorto PHM carbs with a inlet stub OD of 46mm

Use clip SSA45970
This part will only fit late PHM40 carbs with 46mm inlet stubs, we recommend measuring your carbs before ordering

part in stock 2 in stock

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Rubber

FUA14114 Fits Cali 3, Cali 1100 (carb), Le Mans 1, Le Mans 2, Le Mans 3, Mille GT, Spada 3, T5, Strada 1000, 1000S (PHF36 carb)

Dimensions:
42mm internal diameter x 38mm long

Inlet rubber with HT lead guide

Fits between exhaust manifold on cylinder head and carb. Use hose clip SSA45970. Suitable for PHF30 and PHF36 carbs

part in stock More than 5 in stock

14114350-z 14114350 GU14114350 14 11 43 50
1411 4350 1411.4350 14.11.43.50

£13.00

INC VAT

£10.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30611 Fits G5, Convert, T3, T4, T5 1000 SP, SP II, 750S, S3, V7 Sport

Dimensions:
44mm ID at carb, 30mm ID at engine inlet

Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHF 30 carb conversions on models previously fitted with VHB30 carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts. Can be used to replace PHF30 inlet manifolds 17116265 and 17116365 which are no longer available. These manifolds exit the heads at a different angle to VHB manifolds and in some cases you may need to modify side panels to allow clearance for air filters

part in stock 1 in stock

£39.00

INC VAT

£32.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30612 Fits Le Mans 1, Le Mans 2, Spada 3, Strada 1000, Cali 3 Classic, Cali 1100 Carb

Dimensions:
Accepts a 44mm OD carb

Plastic inlet manifold, replaces unavailable aluminium manifold. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. PHF36 carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts

This part is available by special order, request a quote

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Gasket

ENA27155 Fits 1100 Sport ALL, Cali 1100, Cali EV, Spada 3, Le Mans 1000, 1000S, V11 Sport ALL

Dimensions:
73mm x 68mm x 1mm overall. 41mm internal diameter

Gasket for inlet manifold

part in stock 1 in stock

28115560-z 28115560 GU28115560 28 11 55 60
2811 5560 2811.5560 28.11.55.60

£1.70

INC VAT

£1.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Idle Screw Kit

FUA93600 Fits 1100 Sport Carb, Cali 1100 (carb), 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 350, Nevada 750 (1991-2003)

Dellorto kit containing idle adjust screw, o ring, spring and washer

Fits all VHB, PHF, PHBH and PHM carbs

part in stock 1 in stock

13936600 GU13936600 13 93 66 00
1393 6600 1393.6600 13.93.66.00

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Hose Clip 6-16mm

FUA00004 Universal Part

Small stainless steel hose clip for fuel, oil and small breather pipe unions. Suitable for fuel injection hoses

part in stock More than 5 in stock

£1.70

INC VAT

£1.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Hose Clamp Stainless Steel

SSA45970 Fits Cali 3, Cali 1100 (1994-1997), Le Mans 1, Le Mans 2, Le Mans 1000, Le Mans 3, Mille GT, Spada 3, T5

Dimensions:
45-70mm ID x 8mm

Stainless steel hose clamp, various applications including securing inlet rubbers

Used to clamp inlet manifold and airbox sleeve (Le Mans 1000)

part in stock More than 5 in stock

93305057 GU93305057 93 30 50 57
9330 5057 9330.5057 93.30.50.57

£3.90

INC VAT

£3.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Hose Clamp Stainless Steel

SSA32957 Fits Nevada (1991-2003), V65, V65 Florida, Lario, Monza, V50 3, Cali 3, Cali 2, Le Mans 3, Mille GT, T5, SP II

Dimensions:
32-57mm ID x 8mm

Stainless steel hose clamp, various applications

Used to clamp inlet manifold (FUA19114) on Nevada (pre 2004), V65, V65 Florida, Lario, Monza and V50 3

part in stock More than 5 in stock

93305032 GU93305032 93 30 50 32
9330 5032 9330.5032 93.30.50.32

£3.90

INC VAT

£3.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 4 of 11

1 2 3 4 5 6 7 8 9 10 11